Recent content by Mdheever

  1. M

    ROAD to 400HP

    Upate: Did 340hp and 373ft lb at the flywheel. I am relatively happy with the results but would have liked some more power. Issue is my car really does not want to take too much timing at the top and can only do 13deg from peak torque up to 16deg to redline increasing it make the motor knock...
  2. M

    ROAD to 400HP

    I installed my injectors last weekend and retuned during last week. Pump fuel map was only around 1.25bar(18.1psi) to be able to run additional timing rather than boost. Bought some OB and mapped my 1.5bar(21.7psi) boost map on the HKS EVCS and it is a different monster. Sent from my LG-H840...
  3. M

    ROAD to 400HP

    The came pre gapped at 0.031(0.8mm). Which I saw was the standard gapp for them so kept it like that Sent from my LG-H840 using Tapatalk
  4. M

    ROAD to 400HP

    I installed the one step colder plugs over the weekend and the but dyno says the car is much happier with it[emoji12] Sent from my LG-H840 using Tapatalk
  5. M

    New Member

    Subaru fixed the piston issue for the new motor only to create a rod issue[emoji85] I have drivin in the FA20 WRX. Power delivery is very smooth. But can feel it lacks the punch of the STi and the higher torque from the 2.5 motor. Sent from my LG-H840 using Tapatalk
  6. M

    Pink Plasti Dipped Wheels #Barbie

    Also first time i tied gloss. Mainly used it as protection for the pink(brake dust and UV). Had lime green on my previous car and after about 3 months the brake dust started to fuse with the matt green and could not get it properly cleaned anymore. Sent from my LG-H840 using Tapatalk
  7. M

    Pink Plasti Dipped Wheels #Barbie

    Hey guys. Plasti dipped my wheels pink. What do you guys think? Did gloss top and a lite coating of metalizer for a shimmer. Sent from my LG-H840 using Tapatalk
  8. M

    ROAD to 400HP

    Its a local SA manufactured one. So not a brand name like process west etc. Running a 3 port HKS EVCs boost controller. Sent from my LG-H840 using Tapatalk
  9. M

    ROAD to 400HP

    Still TMIC, but an aftermarket larger one Sent from my LG-H840 using Tapatalk
  10. M

    ROAD to 400HP

    Got my one step colder plug and injectors this week. Busy sorting out my wheels and will then install them and get tuned.[emoji1] Sent from my LG-H840 using Tapatalk
  11. M

    Hello, new to site from NW Indiana '05 STi & '04 FXT

    Hey man. Welcome. Car looks very clean and awesome man. Love it that your wifes foz is modded and the STi is stock. [emoji6] Sent from my LG-H840 using Tapatalk
  12. M

    ROAD to 400HP

    Hi guys, Currently progress to try and get my 2006 STi to 400HP(flywheel) on pump fuel and thought I would share how it goes. Current mods of the car; ACL Bearings Standard Rods Manley 100mm pistons Arp headtuds 12mm oil pump Mishimoto radiator Silicone turbo intake Bigger intercooler Td05...
  13. M

    New member

    Hey guys thanks for the welcom. This photo is the same spot, just a different angle to see Table Mountain. What my engine bay currently looks like. Sent from my LG-H840 using Tapatalk
  14. M

    New member

    Hi guys. Marius van den Heever here. I have a 2006 STi and I live in Cape Town, South Africa. Car has a forged build, td05 20g turbo, full dp and exhaust, bigger intercooler and HKS EVCs and tune. Look forward to chatting with you guys. Sent from my LG-H840 using Tapatalk
See more
Top