BoxerRumbleSTi
New member
This is for Installation of the TurboXS SRI or any other SRI (Short Ram Intake)
1) Unbolt the box and take the lock clamp off the intake box and remove it. Then below that is a big milk jug thing. That too has like 2-3 bolts. Just take those out and work the snorkel out the car. This for one will open up the car and will be a little louder with its spooling.
2) Installing the TurboXS Intake. Insert the metal intake tube into the accordion hose (unless you got a whole setup with new accordion hose). Take the locking clamp and tighten the Filter onto the intake pipe. Make sure you put the MAF off the stock box and put it on the Intake Pipe. Most Aftermarket Kits made FOR the Subaru WILL have the MAF on the pipe to connect it.
There you have it. Short, sweet and to the point.
1) Unbolt the box and take the lock clamp off the intake box and remove it. Then below that is a big milk jug thing. That too has like 2-3 bolts. Just take those out and work the snorkel out the car. This for one will open up the car and will be a little louder with its spooling.
2) Installing the TurboXS Intake. Insert the metal intake tube into the accordion hose (unless you got a whole setup with new accordion hose). Take the locking clamp and tighten the Filter onto the intake pipe. Make sure you put the MAF off the stock box and put it on the Intake Pipe. Most Aftermarket Kits made FOR the Subaru WILL have the MAF on the pipe to connect it.
There you have it. Short, sweet and to the point.
