Hello My name is....

Bluedemon_II

New member
Well I'm 22, I live in the one and only Rum capital of the world.

I have a 2004 sti Called "El Demonio azul" which is a literal translation of my user name. I got this Sti when my 2006 wrx died in between 2 trees and an FJ cruiser...

I started my passion for moding or fiddling with an engine with my 1986 Subaru GL wagon, not much to do there but meh, 16 years old and I wanted to learn stuff. Then I got the wrx but i didn't come to learn until I got the sti and a good friend showed me the basics. From there on I was fascinated with the world of tuning and subarus.

Here is my car introduction Aka: mod list.


Cp pistons Standard size with cp rings
Eagle Esp rods with Arp hardware
Arp Head studs
Cosworth race bearings: Journal and Rods
New oem oil pump
Power enterprises super Kevlar II timing belt
Brian Crower Stage 2 cams [Adv. Dur.: 272/272 Dur. @.050: 222/222 Lift: .400"/.400"(10.16/10.16mm)]
Brian Crower valve springs and Ti retainers
3 angle valve job for the heads and some polishing
Grimspeed phenolic spacers 8mm
SSAC Frount mount intercooler
Coolingmist CMGS Controller for my existing water injection system.
Crucial racing thermostat
Zero sports radiator cap "Removed due to the fact that it was leaking and caused overheating"
Green drop in filter Sold
Txs knock lite Sold
Autometer boost meter "Removed and in storage"
Txs Dual stage boost controller-Replace by a 3 port Solenoid. The ecu is now back in control. And the Bcs is now scrapped in favor of a Hallman Mbcs.
Tial 38mm V-band external gate
Cooling mist high pressure CMGS.
Maddad equal length headers "Wrapped and sealed"
Custom magnaflow Exhaust "Catback"
Helix catless downpipe
Perrin side feed fuel rails
Walbro fuel pump x2
Blitz turbo timer " it doubles as a volt meter"
Spec stage 3 clutch 6 puck cerametalic
Perrin Big maff intake "Going to be sold as soon as the holset sets in"
Aeromotive Injected by pass Fuel pressure regulator.
Carbonfiber exhaust heat shield.

As for suspension and braking mods:

Tein Super Street coil overs + Pillow ball upper mounts
Tein EDFC
Whiteline 22mm rear adjustable sway bar
Turn in concepts Klunk killer bushing kit.
Kartboy Rear subframe lock down bolts.
5 zigen Fn01r-c 18x8.5 40mm offset "or something like that"
Toyo T1R tires 235 40 ZR18 "New tires: Nexen N3000 tires 255 40 ZR18"
Agency power foged aluminum pitch stop "Snaped In half POS... Stock one back in place while a kart boy one finds its way in"
DBA 5000 series 2 peace brake disk up front
Goodrige SS brake lines with Motul 6.1 brake fluid
Ferodo Ds2500 brake pads.


Pics:

SS850704.jpg


SS850707.jpg


SS850725.jpg


SS850734.jpg


SS850661.jpg


SS850731.jpg


SS850704.jpg


All that went into this>

SS850991.jpg


Old pic of the car while running threw the dunes of Pr.

Hope to meet you all soon!
 

IGOTASTi

System Operator
Staff member
Thanks for joining and welcome!
 

HolyCrapItsFast

Drinks beer!
Welcome to the site and enjoy!

Really nice list of mods ya got there. Is all that stuff in there now or are you installing?
 

Bluedemon_II

New member
It's all in the car atm. I'm working on a VGT setup right now. I'm fallowing part of the work made by Evil06sti on iwsti but he sold the car and never got around to tuning it so i'm basically working from scratch. More details on this when I get to create my garage section :D
 
Last edited by a moderator:
Top