Monitoring knock

Tactrix to the program?

Do you have the rom definitions installed yet?

I'm assuming thats the car_def xml files? I placed those in the RR directory.
 
1. Install ECUflash it will take care of the driver and upgrade the firmware of the cable of required
2. Download leanring view and run it, it will display the ecuid and calid of your ecu (just for info)
3. Run romraider logger click on "logger definition location" choose the file downloaded from the first link in my post" after extraction it of course.
 
1. Install ECUflash it will take care of the driver and upgrade the firmware of the cable of required
2. Download leanring view and run it, it will display the ecuid and calid of your ecu (just for info)
3. Run romraider logger click on "logger definition location" choose the file downloaded from the first link in my post" after extraction it of course.
Installed ECUFlash.
Downloaded and tried to use Learning View, it said the following
ECU ID of 8B12784007 not found
Your ECU is not currently supported
So looks like its the correct ECU ID that you linked me to.

But yea I have the internet reaching out to my garage on my laptop here.
RR still trying to "connect" but nothing happens.
Any issues using windows 8?

811D242D-2137-4CDE-9F82-81DE2F68AC30_zpsxv0meb0p.jpg
 
Add the AF sensor for the air fuel ratio i forget to add that parameter.

Loggin is working no problem on that.

Just the map definition has an issue to display the rom tables, Will fix it and let you know.
 

Alin

Diehard Car Enthusiast!
Sorry to be off topic but "wow pretty alienware!" :lol: damn man if thats your tuning laptop, many bows!

:bow: :bow: :bow: :bow: :bow: :bow: :bow:

My laptop is a prius and yours is a la ferrari! :lol:
 
Lol thanks!

On the side note, I can't seem to find feedback knock correction, nor CL/OL fueling in the list lol. I should have saved it.
Or will these options only display when connected to the car? Cause I was just trying to pre load them up before connecting. About to grab a few logs.
 

Alin

Diehard Car Enthusiast!
Some parameters only show up when the ecu is connected.
 
Beware, that the driving vibration in the car might kill your normal Hard-drive in the Alienware. I suggest that you get a cheap laptop with SSD.
 
Beware, that the driving vibration in the car might kill your normal Hard-drive in the Alienware. I suggest that you get a cheap laptop with SSD.
It's all good, I have plently of hard drives as well SDD's. My desktop alone has 10 drives, check it out here :p http://igotasti.com/vBforum/showthread.php/8736-Show-us-your-PC-Gaming-Rig!?p=114779
Nothing important on my laptop other than just games. But yea, I might look into a windows tablet with a usb port that can handle processing logging as a display monitor.
What would be nice is if I could gut the chromebook clean into a dual boot windows environment for logging haha.

Anywho, I was only able to get x2 cruising logs and an idle log. Too much traffic for me to even attempt a pull.
Long log cruising https://docs.google.com/spreadsheets/d/1iz5-my9liqcAq9qCnd2hsFOPwBW-oYpj_JMmZZP17h4/edit?usp=sharing
Short log cruising https://docs.google.com/spreadsheets/d/1BdHuiDl_gpP4E0bsmyv8IysSey7Xt-K7HxCJTzY1PNQ/edit?usp=sharing
Idle log about 5mins https://docs.google.com/spreadsheets/d/1larfVw_I2i_kWUeCDm3gadicUkRtqlT_N2y3mxPfFgI/edit?usp=sharing
 
Not bad sounds good for a stock car. I suggest to change "Manifold Absolute Pressure" with "Manifold relative Pressure" it will give you the exact boost, you don't have to subtract the Atmospheric pressure to know your exact boost.
 
Guys is the 2015 Model comes with a wideband AFR by default!?? [MENTION=3232]CSF707[/MENTION] AFR sensor looks like a wideband in the logs.
 
Top