Introducing myself

jsbrown923

New member
What's up everyone? I'm new to the STi work as of 2 weeks ago. I purchased a 2005 STi, metallic grey, 44k miles.

I sold an 03 bmw m3 with 70k to transition over to the subie world. Excited to be here and start becoming involved in the community.


Sent from my iPhone using Tapatalk
 
Welcome to the community and nice car. Make sure to throw pics in your car build thread since we all love pics lol.

Sent from my ONEPLUS A3000 using Tapatalk
 
^^^^^
What he said lol...


Welcome if you have any questions feel free to ask.


Sent from my iPhone using Tapatalk
 

jsbrown923

New member
Will do guys. I've got a lil story already to go with this the car lol. I'm going to start adding content asap


Sent from my iPhone using Tapatalk
 

SDMotorworks

On Vacation
[MENTION=6278]jsbrown923[/MENTION] Welcome to the forum, let us know if there is anything we can help you with.
 

IGOTASTi

System Operator
Staff member
[MENTION=6278]jsbrown923[/MENTION] welcome friend. ?

?Join us as Lifetime Platinum Member today!?
 

jsbrown923

New member
Here she is a couple days after I got her.

eefa34d49caacb0128701fb3a357080b.jpg


4ac1984f6966ffeb9899a7c6d228a53a.jpg


444d0ca8ba72305ca2f0ee841e178064.jpg


ac516b0b8fbe838a9fbf01f35377efee.jpg


Current Mod List:
- ATP gt30r .63 rotated kit
- Turbo port matched with down pipe, down pipe wrapped and sprayed with dei paint
- Precision FMIC custom piping
- Tial 38 mm wastegate
- HKS carbon ti exhaust
- Dual HKS bov
- Dual Moroso catch cans
- Apexi turbo timer
- AEM wideband, defi boost, pyro, oil temp with controller
- Id1000 injectors
- Perrin fuel rail
- AEM v2 standalone
- Aeromotive fpr with oil gauge
- Top feed tgv deletes w/ port matching
- Mishimoto Radiator hose
- Stage 1 phenolic spacers
- Mildly ported Built heads, stage 1 gsc cams with valve springs, retainers, lockers, guides
- Ferrea valves
- ARP headstuds
- Powder coated intake manifold - Port matched
- Beat rush pitch mount
- Tomei Headers port matched and jet coated
- Heat wrapped harnesses and ac lines and p/s
- Killer b coolant rsvr and oil pickup
- ACT Stage 2 clutch
- ACT moderately lightened flywheel
- Tien coil overs ss
- STi front strut bar
- STi H brace
- Kart boy end links front and back
- HPS brake pads
- Varrstoens Es2 wheels
- Pro drive mudflaps
- Weather tech floor mats
- Aluminum shift ball
- Optima Red top battery
- Front lip, rear window lip, jdm rain guards
- Alcantera shift boot and ebrake boot titanium shift ball and short shifter
- Hella horns
- LED bulbs all around


Sent from my iPhone using Tapatalk
 

jsbrown923

New member
The motor has been pulled and the following parts have been dropped off to begin the build

- Grimmspeed EBCS

- IAG stage 2 shortblock

- IAG garret GTX series turbo oil feed & avcs lines

- AEM 3.5 bar MAP sensor

- AEM intake temp sensor

- Cosworth high flow intake manifold

- AEM 320lph fuel pump

- AutoMeter a-pillar triple gauge

- Innovate ethanol content percent gauge

- AEM oil pressure gauge

- AEM flex fuel sensor kit w/ IAG lines and Aeromotive A1000 FPR

819ae3dd85ef21bf75a4fc7b9e6cfe77.jpg



Sent from my iPhone using Tapatalk
 

jsbrown923

New member
Next week the last, and most fun group of parts should arrive

- ETS STi full rotated kit upgrade w/ turbo manifold, up-pipe, downpipe, upper ic piping, 4" intake, TiAL 44mm wastegate, garret gtx3076r .82 turbo (all V-Band), set up for Speed Density

- ETS 3" FMIC for rotated kit, AIT bung (speed density), & hks bov flanges

- Exedy stage 4 HD twin metallic disc clutch kit


Sent from my iPhone using Tapatalk
 
Top