NY | 04 WRX WRB | Full STI swap | JDM 6speed | $10,000 Firm

Status
Not open for further replies.

This is my daily driver and mileage will go up.

2004 WRX with full STI swap, trans (non-dccd), rear diff, hubs, axles, gold brembos, interior carpet swap, door cards, center console, gauges cluster.
128k on WRX frame (bought car with 94,xxx) in 2012.
30k on 2011 STI block built by Performance Auto Solutions in Deer Park, NY
80k on JDM transmission (non-dccd), JDM rear diff, axles, hubs, Brembos

Asking Price: $10000 firm
Three owner car, originated from GA.
Located currently: 14127, NY

Contact me to meet, and see the car. Test drives only unless a serious buyer. Thank you for your time. My name is Ken, contact by email: wesley9202 at gmail/text 716-570-2877 or call phone for reply.

I am not trying to hide ANYTHING! As you can see I listed the VIN: JF1GD29674G518308.

This is my daily driver and I really love this car. It has its minor dings and dents, rockchips etc. as a normal daily driver. There is a small rust spot underneath both front fenders, both can barley be seen. I have to part ways with it so I can finance on a new vehicle that can fit my daily commute, and I do not want the mileage on this car, she is such a jem. I bought it with 94,xxx miles and now it has 111,xxx miles. I have owned it for 2 years and only drove 17,xxx miles on her. Upon purchase, title can be released immediately. I bought her for intent to keep forever, but changes in my life thought otherwise.

It is tuned by Dave Brown from Performance Auto Solutions with a (break in) low boost tune and (daily driving) high boost tune/maps. SO if you want you can run low boost for winter.

Hybrid motor 2.5L bottom end, 2.0L JDM heads with a BC 280 cam

Engine:
Built by Performance Auto Solutions
New EJ257 2011 STI Shortblock (STI, crank, rods, and bearings)
New Manley forged pistons 99.5 stock bore
New Manley rings hand filed fitted
New Gaskets/Seals/Hardware
New Gates Timing Belt Kit
New 2011 STi oil pump
New OEM oil cooler
New Vacuum lines/hoses/OEM PCV System components
New EVAP solenoid
New Subaru Battery
Version 7 JDM big port heads (PnP), radius valve and decked
Brian Crower cams 280
New stock springs and retainers
Crawford V2 air oil separator
Performance Auto Solutions EBCS
Subaru OEM filters
Rotella T6 5w40

Air:
AEM CAI Cone
APS 83mm CAI (Denso MAF)
APS dr725 FMIC
(PnP) Throttle body with heat coating
(PnP) Intake manifold with heat coating
(PnP) TGV deletes
Pheloic spacers 6mm

Fuel:
850CC Denso Injectors
Perrin Fuel rail kit V2
Walbro 255 LPH

Turbo:
APS 3in Hard turbo Inlet
AMR T60 Turbo 10.5cm exhaust housing
* 3 inch compressor inlet
* Fully ported exhaust housing
* Fully ported compressor housing
* OIL AND WATER COOLED!
Turbo blanket

Cooling:
Mishimoto Radiator with Samco hoses
APS Chrome Overflow tank
New OEM 170 thermostat
Fresh Coolant flush green 50/50 mix (1 day ago) 10/22

Exhaust:
New Grimmspeed ceramic coated up pipe with EWG (within 2k) (heat wrapped)
Tial 38mm external wastegate w/ dump tube
HKS High power catback exhaust 3in
Moore Performance Downpipe 3in, no wastegate side.
Grimmspeed exhaust manifold with hi flow x pipe (PnP) (heat wrapped)

Suspension:
Perrin F&R Sway bars and spherical end links
Super pro polyurethane steering rack bushings
Whiteline anti lift kit
Tokico Shocks D-spec
RCE springs (Yellow)
Whiteline Top hats (front)
Saggy butt spacers for the rear
Whiteline rear diff lock kit
Whiteline rear sub frame bolts
GT spec rear strut tower bar

Drivetrain:
JDM 6 speed swap (non-dccd), r180 rear differential 5x100 hubs (new fluids 3k ago)
Amsoil Fluids Severe Gear
Torque solution short shifter and bushings
Torque solution rear shifter bushing
ACT 6 puck HD and pressure plate (installed 15k ago)
ACT streetlight flywheel (15 lbs)
Cusco engine and transmission mounts

Brakes:
Brembo Brakes (4-pots)
DBA F&R Rotors
Hawk HPS pads 40-50% life F&R
Gruppe S SS lines
Grimmspeed Master Cylinder Brace

Interior/Electronics:
04 WRX to 05 STI center console swap.
05 STI gauge cluster
Sparco Toreno 2 seats
Innovate Wideband A/F Gauge (needs new one) then protune
Defi Oil temp, Oil pressure, and boost gauges
Pioneer AVIC D3 head unit
Alpine Type s Components front
Kicker speakers Rear
Alpine 4 channel amp
Cobb AP version 2 with window mount

Exterior:
Rally Armor UR mud flaps blue logo
30% rear window tint with 5% front visor
De-badged (New Subaru Owner Badges)
Hella Horn Kit painted WRB (Harness, bracket, and horns from subimods)
Tein CF hood dampeners
JDM Tail light mod
LED license plate lights
JDM Sparco Rally Spec 17x7.5 powder coated black
225/45/17 winter tires

4633a789680e066f2144d2d48178e933.jpg
25bed55b44ea19dcda41fb630726dcd5.jpg
3c07e17b64513639c003d7b1f8d0b7cf.jpg
627ab41454ace654bb2b62944966a753.jpg
b6fd8da0827e90c8fccfb0b5d1e5ab14.jpg
075069ed6564ba4ff6092cf1823e26b6.jpg
ba14e4bde171b2409e44d198a5f316b0.jpg
 
Last edited:

IGOTASTi

System Operator
Staff member
GLWS, but why you selling it?
 
My new job is a long 1 hr each way commute. I dont want the miles on her. I plan on getting a 15' wrx or STI though! :)
 

IGOTASTi

System Operator
Staff member
Good deal.

We will share this on our social media with a link back to your thread here. :)
 
tires mounted and balanced today bump!
 
priced to sell bump
 
why does no one want such a reliably built, beautiful car bump?
 
because not many people respect a quality build and think its over priced. but in reality its a heck of a deal.

beautiful car and glws but you should still keep it :)

thanks for the kind words. i would like my loan paid off but if no one wants her. Ill keep her
 

IGOTASTi

System Operator
Staff member
Tons of traffic on our social media page when we posted it.
 
bump for low priced WRX swapped STI
 
Update: car has been serviced with all new pads, all new fluids, and rebuilt transmission, it is up to spec with backlash, and I have the proof in the puddin! The price is negotiable. Asking 15k


Sent from my iPhone using Tapatalk
 
Well where do I begin? I bought this car in 2012 and have had a lot of work done since then. I have everything documented in a folder. If you want to come see her just call or text me leaving a brief message.

2.5l 11' STI short block with Manley drop in pistons
2.0l V7 STI heads, the V7 STI is JDM that's why their 2.0l if you don't know anything about Subaru then do your research and come back to me.
Brian Crower 280 cams
Gates timing belt kit with water pump
Ported Intake manifold and throttle body
Perrin fuel rails with 850s and big fuel lines I also have an Aeromotive Fuel Pressure gauge
Walbro 255lph
AMRT60 turbo, Tial 38mm EWG setup
APS hard turbo inlet with AEM filter
APS FMIC
Blitz BOV
Grimmspeed high flow x-pipe with exhaust manifolds
Grimmspeed ceramic coated up-pipe
Moore performance down pipe
HKS hi-power cat-back
3-port EBCS
Innovate wideband AFR gauge
Defi tri-cluster
Defi boost
Defi oil pressure
Defi oil temp
Defi Link controller
STI cluster, center console, door cards, floor carpet
Sparco Torento 2 racing seats
GT spec rear strut tower brace
Tokico struts and shocks with RCE yellow lowering springs, Whiteline tophats, saggy butt spacers for the rear
Perrin F&R sway bars with spherical bearing end links, and rear sway has Perrins tough mounts
Whiteline anti lift kit
Whiteline transmission mount bushing
Whiteline control arm bushings
Solid aluminum with bushing pitch stop mount
Solid motor mounts
JDM V7 STI 6Speed
Bremo brake calipers with SS lines
Grimmspeed master cylinder brace
Hawk HPS pads
DBA slotted rotors
Sparco Rally Spec 17x7.5 5x100
Winter tires 225/45/17

There may be more aftermarket parts I can't think of right now I will update post as I can. Until then contact me to come see the car! Asking price is $10,000 obo thanks for reading!

f5634a44bc67713630528be363f0f292.jpg
3bd8e18d5576f9a26fbac7541575966d.jpg



Sent from my iPhone using Tapatalk
 
Car is sold!



Sent from my iPhone using Tapatalk
 

IGOTASTi

System Operator
Staff member
Congrats!

Thread is closed.

Ask us how to become a Lifetime Platinum Member today!
 
Status
Not open for further replies.
Top