So, my car has been having issues for the past couple of months. I have a boost leak somewhere. George says it's before the turbo. Alin made me re-tighten the turbo inlet onto the turbo because he said it wasn't seated on correctly. I'm going to name the things that have been replaced in order to ensure we can perform the boost leak test correctly and successfully.
-replaced the PCV valve with a brand new OEM one
-Grimmspeed EBCS
-silicone intakes vacuum lines
-Ebay silicone turbo inlet
-zip tied all lines
-steel clamped all hoses
Today, I performed another boost leak test and the car would not hold ANY boost. I had all of the correct lines blocked off, the oil cap off, and so on. The air would go in through the inlet and straight out the engine oil fill tube. If I covered the fill tube, the car would hold about 5 psi since that's all I went up to. What is my issue here?
George, we are going to take another log for you shortly and check if anything changed at all. Tomorrow, I have the opportunity to do another boost leak test. Someone please tell me what my issue could be here.
[MENTION=1]IGOTASTi[/MENTION] [MENTION=9]HolyCrapItsFast[/MENTION] [MENTION=662]Batmobile_Engage[/MENTION] [MENTION=3416]WRB_STi[/MENTION] [MENTION=6025]SDMotorworks[/MENTION] [MENTION=5388]Raven32[/MENTION] [MENTION=2822]Doppelganger[/MENTION] [MENTION=600]black bandit[/MENTION] [MENTION=1868]Boogieman98[/MENTION] [MENTION=652]Grinder34[/MENTION] [MENTION=1507]Spamby[/MENTION]
-replaced the PCV valve with a brand new OEM one
-Grimmspeed EBCS
-silicone intakes vacuum lines
-Ebay silicone turbo inlet
-zip tied all lines
-steel clamped all hoses
Today, I performed another boost leak test and the car would not hold ANY boost. I had all of the correct lines blocked off, the oil cap off, and so on. The air would go in through the inlet and straight out the engine oil fill tube. If I covered the fill tube, the car would hold about 5 psi since that's all I went up to. What is my issue here?
George, we are going to take another log for you shortly and check if anything changed at all. Tomorrow, I have the opportunity to do another boost leak test. Someone please tell me what my issue could be here.
[MENTION=1]IGOTASTi[/MENTION] [MENTION=9]HolyCrapItsFast[/MENTION] [MENTION=662]Batmobile_Engage[/MENTION] [MENTION=3416]WRB_STi[/MENTION] [MENTION=6025]SDMotorworks[/MENTION] [MENTION=5388]Raven32[/MENTION] [MENTION=2822]Doppelganger[/MENTION] [MENTION=600]black bandit[/MENTION] [MENTION=1868]Boogieman98[/MENTION] [MENTION=652]Grinder34[/MENTION] [MENTION=1507]Spamby[/MENTION]