2013 projectors STi
- Thread starter 13SubSTi
- Start date
War_Panda04
STill Plays With Toys!
we need more details on what you are trying to do. do you have a light out? do you want HID's? are you confused on what projectors are?
War_Panda04
STill Plays With Toys!
the term projector refers to the way the light is distributed through the headlight housing. HID is the type of bulb that is in the headlight assembly powered by what is called a ballast. which on our car is built into the headlight assembly as long as it is factory installed. if you want to upgrade the light to a brighter/bluer light i believe all you need to do is change the bulb
keep in mind the higher number the bulb is the less visibility you will have to the road. especially when its raining or foggy. i would recommend either a 6000k or 8000k bulb for a great look and best visibility.
hope this helps you out. again im not entirely sure if the factory ballasts will be able to power these bulbs
keep in mind the higher number the bulb is the less visibility you will have to the road. especially when its raining or foggy. i would recommend either a 6000k or 8000k bulb for a great look and best visibility.
hope this helps you out. again im not entirely sure if the factory ballasts will be able to power these bulbs
Why not LED bulbs?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
A proper set of HID will out perform led in the distance it can throw the light from what I've been informed on thru the research.
PS retrofit resource makes legit set ups I just received my kit for my Ford taurus lol.
Sent from my ONEPLUS A3000 using Tapatalk
I don't know a about that. Many of the higher end cars use LED headlights. And from what I've seen they perform just as well. The industry is making the move to LED because of their durability and lifespan. I will probably switch my HID to LED soon. I've already have done the fogs
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Well it's probably a general statement because there's so many Chinese made led systems out there. Most also do a HID & LED combo as well but if you go to led make sure you get ones made with Cree or Philips LED since those are the top two brands.
This is one of my first reef lights I made and the center black led stars burnt out since they were cheap China LEDs. You can say I've over researched LEDs a bit.
Sent from my ONEPLUS A3000 using Tapatalk