1. Get a buddy to help
2. Remove clutch reservoir cap
3. Top off fluid
3. Pump clutch pedal 3-4 times, last pump, hold pedal to the floor, or as far down as it'll go
4. Have helper crack the valve open a little. Air and fluid should shoot out, so make sure it's collected and not spraying everywhere. It WILL EAT PAINT.
4a. MAKE SURE PEDAL IS NOT LIFTED AT ALL. Pedal should continue to the floor and HELD THERE.
5. Tighten the bleeder.
6. Go to step 3, repeat as necessary.
NOTE: Keep a close eye on the fluid level in the reservoir. NEVER let it get too low.
Hope that helps.