HELP! Boost Leak BOV

[Z1107]

I have a TurboXS Hybrid BOV that was put on 3 days ago. Ive driven the car on multiple short trips around town, but today I took it out for a joyride and every time my car entered boost it sounds like my car is venting. Ive looked at all the lines and everything looks good. Any advice.

 

[Z1107]

Thanks for the help John (Undecisive). When it finishes raining and I can't get back under the hood I'll find out if that did the trick.

 

[HolyCrapItsFast]

What was the suggested solution??? :lol:

It would be nice to know what the solution is so others with the same issues can reference this post. :tup:

 

[Z1107]

I will when I pick up some T-clamps tomorrow.

 

[Undecisive]

I told him to remove the BOV, and reinstall it to make sure the gasket is seated properly. Once finished with that, I said to remove the lines On the BOV and then to follow them to where they end and make sure they are properly seated and tightened. Then to hook the lines back up on the BOV in the same fashion, fully seated and tightened.

Also, Zach Make sure you have the correct spring in the BOV

If that's not the solution, A vacuum line could have a hole in it somewhere in the system.