Silver Bullet 2004 WRX STI

[Raven32]

So got out and did some more work today. Didn't hurt that wife was at work lol.

That being said I painted the TGV 's

Also got around to baking the intake and TGV's as well.

Gotta say this wrinkle red dries slower than molasses. Took 48 hours before I could handle it enough to bake it and cure the paint. All in all I am happy with the results.


Sent from my iPhone using Tapatalk

 

[Doppelganger]

It looks great bro

Sent from my ONEPLUS A3000 using Tapatalk

 

[Raven32]

So after all this painting I had slot of prep work on the bits. Was gonna paint the down pipe to protect against the elements tonight but couldn't due to my grinder being on the ground and it's an awkward piece. So I guess you could say I was bored. At any rate I made a stand for it from wood out the wood pile. Not pretty but will get the job done.

Sent from my iPhone using Tapatalk

 

[Raven32]

So quick clean up on meth brush and three coats later.

Sent from my iPhone using Tapatalk

 

[Raven32]

So on lunch today I was think about how I want my gauges to look and came up with this. Looking for feed back for the actual gauge layout.

Sent from my iPhone using Tapatalk

 

[Doppelganger]

So on lunch today I was think about how I want my gauges to look and came up with this. Looking for feed back for the actual gauge layout.

//uploads.tapatalk-cdn.com/20170228/46626cf13518aa603110f67b9e5152a6.jpg

//uploads.tapatalk-cdn.com/20170228/d8d04ad3a797d436165ee0f1b3f7e8e6.jpg


Sent from my iPhone using Tapatalk

Looks good which gauge is that for?

Sent from my ONEPLUS A3000 using Tapatalk

 

[Raven32]

Looks good which gauge is that for?

Sent from my ONEPLUS A3000 using Tapatalk

I am making one from scratch using some of @HolyCrapItsFast work. But instead of putting it all in one touch screen was gonna make actual gauges and put them in my center pod.

 

[Doppelganger]

I am making one from scratch using some of @HolyCrapItsFast work. But instead of putting it all in one touch screen was gonna make actual gauges and put them in my center pod.

Let me know how it goes I was actually researching the same concept last night and found George's gauge write up on an andrino forum I believe lol.

Sent from my ONEPLUS A3000 using Tapatalk

 

[Raven32]

Let me know how it goes I was actually researching the same concept last night and found George's gauge write up on an andrino forum I believe lol.

Sent from my ONEPLUS A3000 using Tapatalk

He actually has two write ups that I have found. First things first gotta wait for the displays to arrive.


Sent from my iPhone using Tapatalk

 

[Raven32]

So it's been a minute since I have updated this. So long story short mort is back together and back in the car. Just got turbo back from boostlab out in Florida, and started final engine dress. Still have some work to do tommarow/today after work but with any luck I will fire the motor again tonight. Here's some pics of the work that's been done.

Sent from my iPhone using Tapatalk

 

[Doppelganger]

Good luck and hope it all works out for long term.

Sent from my ONEPLUS A3000 using Tapatalk

 

[Raven32]

So another update. While, my sons car's radiator goes out water pump on my Yukon goes out today. Got both replaced and burped. Then moved on to my sti. Once again she is alive.

Now to burp this one and check for leaks. [MENTION=9]HolyCrapItsFast[/MENTION]. Will be in touch to continue the tune.



Sent from my iPhone using Tapatalk

 

[Raven32]

Well tommarow need to find some new egt plugs. Ones I ordered from amazon latterly melted.

Wonder if I can find some 1/8 npt stainless plugs.


Sent from my iPhone using Tapatalk

 

[Raven32]

Update update read all about it the sliver bullet lives again.


Sent from my iPhone using Tapatalk

 

[Doppelganger]

Update update read all about it the sliver bullet lives again.


Sent from my iPhone using Tapatalk

Congrats

Sent from my ONEPLUS A3000 using Tapatalk

 

[Raven32]

Hmm what's this...

Or this

https://youtu.be/RTWS0l-W3I4
More to come soon.


Sent from my iPhone using Tapatalk

 

[Raven32]

So wheel bearing went out with last rain so took a moment to snap a few pics while I changed it.

Sent from my iPhone using Tapatalk

 

[Raven32]

While I was doing wheel bearings other day noticed it was time to do top hats and ball joints. They where in really bad shape.

So I ordered a new set of front group n top hats for the struts and OEM set of ball joints.

Sorry didn't take as many pics tonight just wanted to get it done.

Hopefully Friday I will be replacing the fuel filter time permitting.


Sent from my iPhone using Tapatalk

 

[Raven32]

Sent from my iPhone using Tapatalk

 

[Boogieman98]

Next owner?


Sent from my iPhone using Tapatalk