Stock wheel alignment steeings

[Piper86]

Hi all
I would like to know what are the stock wheel alignment settings for a 2006 STI?

Getting frustrated with my local tyre place who sets the wheels straight (0deg) and I end up getting wear on the outside of the tyres
And when i tell them i want stock they seem clue less and as to what i want.


And they seem

 

[Alin]

Toe should always be at 0 in order for the steering wheel to be straight. At this setting, the car should not pull left or right. I'm not sure what the stock caster setting is as I've never messed with it. From factory, I believe camber is at -1.5 degrees on the rear. This means that a few cm of the tire will not be making contact on a straight road. However, once you start taking some harder turns, those few cm of tire will start to grip due to the changed geometry of the suspensing during load. I personally rotate my tires with every oil change, every 3,000 miles. This way, all my tires wear out evenly and I can get the most mileage out of them.