Fitment Inc.

Thanks Thanks:  26
Likes Likes:  65
Page 1 of 25 12311 ... LastLast
Results 1 to 10 of 250

Thread: rdkls STi | 9:1 | Outfront Longblock | DeliciousTuning FlexFuel (E85) | GTX3576R

  1. Top Of Page | #1
    Basic Member

    User Info Menu

    rdkls STi | 9:1 | Outfront Longblock | DeliciousTuning FlexFuel (E85) | GTX3576R


    2008 Subaru Impreza WRX STi - rdkls STi

    Follow;
    fb/rdklsti
    ig/rdklsti


    Build thread restructured. First post will always have my latest update, the rest will be on my site.
    ://sti.rdkls.com




    Dyno
    • TO BE DETERMINED... old #'s below.
    • Tuner: William Knose, Delicious Tuning
    • Dyno: Mustang AWD, Infamous Performance
    • Weather: 83 Fahrenheit, 44% Humidity, 646ft Elevation
    • 15 Psi – 367whp, 326wtq - [S]
    • 23 Psi – 454whp, 391wtq - [S#]


    Longblock
    • Outfront Motorsports closed deck EJ257 with pinned mains
    • Outfront Motorsports AVCS pin service
    • Outfront Motorsports spec 1/2" ARP head studs
    • STi JDM 12mm oil pump
    • Molnar 79mm billet crankshaft
    • ARP 2000 case bolts
    • CP Pistons - 99.75mm 9:1 (coated crowns) with upgraded wrist pins
    • Manley Turbo Tuff I-Beam Rods
    • Race ported heads (by SoCal Porting)
    • GSC stage 2 cams
    • Supertech dual valve spring & titanium retainer kit
    • Supertech +1mm stainless intake valves
    • Supertech +1mm inconel exhaust valves
    • Bowl blended heads (for larger valves)
    • King rod & main bearings
    • Gates racing timing belt
    • Killer B oil pan, baffle & pickup tube
    • JE/Athena head gaskets
    • WPC Treatment on select components


    Power
    • Rotated GTX3576R
    • Perrin rotated 2" uppipe (T3)
    • Custom rotated 3" downpipe with QTP electric cutout
    • Perrin 3" intake with K&N filter & pre-filter
    • Perrin EL Big-Tube header
    • Perrin EBCS
    • Perrin/Setrab oil cooler
    • Tial MV-R 44mm EWG
    • Fluidampr Crank Pulley
    • TurboSmart Supersonic BOV
    • Maddad Essentials Street Series Cat-back
    • TurboXS FMIC core with custom charge piping (by KPowered)
    • TGV delete & port, throttle body & intake manifold ported (by SoCal Porting)
    • Rotated STi intake manifold
    • KSTech 9.5mm phenolic spacers
    • Koyo Radiator with Mishimoto hoses
    • Perrin AOS
    • Perrin Thermal turbo & uppipe blankets


    Fuel
    • Radium pump hanger with (2x) AEM 50-1200
    • Radium multi-pump regulator
    • Radium top-feed rails with pulse dampeners
    • Injector Dynamics 2000CC injectors
    • Fuelab 6 micron micro-fiberglass element
    • Continental Ethanol content analyzer


    Electronics
    • DeliciousTuning FlexFuel Kit
    • Ecutek ProECU
    • AEM IAT sensor (tapped just before throttle-body)
    • AEM 5-bar MAP sensor with Cobb MAP sensor adapter
    • NGK 1-step colder plugs


    Drivetrain/Chassis
    • Driveshaft Shop Carbon driveshaft
    • CompClutch Rigid Twin-Disc clutch
    • Torque Solution pitch-stop
    • Beatrush engine mounts
    • Beatrush transmission mount
    • Whiteline gearbox mount bushings (positive shift kit)
    • Whiteline steering rack bushings
    • Whiteline Rear Diff fully polyurethane bushings (front & rear)
    • Whiteline Rear Subframe bushings
    • SuperPro Rear LCA bushings (inside & outside)
    • SuperPro Rear Trailing Arm bushings (front & rear)
    • SuperPro Rear Toe Arm bushings
    • Kartboy shifter bushings


    Suspension
    • Tanabe Sustec Pro S-OC coilovers
    • Whiteline 22mm adjustable front & rear swaybars
    • Whiteline front control arm inner-front bushings
    • Whiteline anti-lift kit
    • Kartboy front & rear solid endlinks


    Brakes
    • Grimmspeed master cylinder brace
    • Goodridge stainless steel lines
    • StopTech Power Slot front & rear rotors
    • Hawk HP+ front & rear pads


    Wheels
    • SSR Type-F matte black 17x9.5 +40
    • Michelin PilotSport PS2 275/40
    • McGard spline drive lugs (black)


    Interior
    • ATI triple gauge pod
    • -Innovate MTX-D Boost/Shift Light
    • -Innovate MTX-D Oil Pressure/Temp
    • -Innovate MTX-D EGT
    • SMY gauge bezel
    • -Gauges: AEM UEGO Wideband
    • 15% tint all around
    • Weathertech floor liners front & rear


    Exterior
    • GTSpec aluminum undertray (splashguard)
    • Hexis 3D carbon roof wrap
    • Hexis 3D carbon front bumper sectional wrap
    • HTAutos full lip kit
    • Rally Armor V2 mudflaps (black/grey)
    • Painted OEM grill/mustache


    Roof Rack
    • Subaru factory rails
    • Inno medium fairing (40")
    • Yakima Frontloader bike racks with lock cores


    2015, Dec 7 - Engine bay complete and first fire video.














    Last edited by Deek; 01-10-2013 at 05:08 PM.

  2. Thanks IGOTASTi thanked for this post
    Likes IGOTASTi, Vermont, tedscossie liked this post
  3. Top Of Page | #2
    System Operator IGOTASTi's Avatar

    User Info Menu

    Subscribed.

    Without you, we cease to exist. Without your support, we stop growing. Without your involvement, we remain at a standstill.
    Thank you for your faithfulness to our organization and your creative ideas and support.


  4. Top Of Page | #3
    Basic Member

    User Info Menu

    Quote Originally Posted by rek888v2 View Post
    • Clutch: ??? I like ACT and have one for sale
    New or used? What model?


  5. Top Of Page | #4
    Basic Member

    User Info Menu

    I love my sprung 6-puck and LW ACT setup.....but I'm crazy.


  6. Top Of Page | #5
    Basic Member

    User Info Menu

    Yeah, a full-face clutch is going to be a requirement... Really if it can handle over 500awhp then it'll be more than sufficient.

    *Updated goals in first post.


  7. Top Of Page | #6
    Basic Member

    User Info Menu

    Quote Originally Posted by Fujiwara View Post
    Six puck does not last long with a retard like me behind the wheel.
    Yeah I had a sprung 6-puck in my B18C5'd 99 DX (hatch), never again will that mistake be made in a daily driver.

    Quote Originally Posted by Fujiwara View Post
    And deek, clutches are rated by torque, not by WHP. They are rated by flywheel torque mind you.
    Good to know, thanks.

    Quote Originally Posted by Fujiwara View Post
    So, you could have a motor that makes 600WHP, but only 300 ft-lbs of torque and maintain a very light clutch. Make sense? For your application, I think you will be making a bit more power than torque. should be below 500 torque at the flywheel IMO. Maybe you will make more with the retarded motor, but I don't really think you will unless the tune is rather aggressive. Which is something not like George at all.
    Understood. Does my planned list match my goals thus far? Is it realistic to assume 425+ awhp daily driven with 91 oct (California horse urine) and alcohol? Is there something you would advise adding to the list, or changing? I don't really want to be maxing out the potential of any component at those numbers, if anything I'd prefer the tune (and availability of real gas) to be what is limiting factors of my power goals. Make sense?

    Last edited by Deek; 07-19-2012 at 04:46 PM.

  8. Top Of Page | #7
    Basic Member

    User Info Menu

    I perfer to not have a warped clutch disc and I can modulate the 6-puck fairly well....so I have no problem with it.


  9. Top Of Page | #8
    Basic Member

    User Info Menu

    Quote Originally Posted by rek888v2 View Post
    I never recommend ragged edge tuning/building but I also never recommend using a grenade when all you need is a knife. Basically Im saying that if 425 is your goal, pick the components that are in their efficancy range at that HP. Now, your 48 wont get you there. Im on 93 OCT and tuned pretty aggressively and Im at 343HP 387 TQ on VD Dyno Jet numbers. Even with meth, Ill be up around 400 but thats still pushing it. My recommendation is a 30R at the least. Eddies motor will hold that quite well but I would also recommend at least doing springs, retainers and sels. Possiably a set of mild cams as well. That will safely get you to your goal without a doubt!
    Curious, what's ragged edge?

    Thanks for the input, that's why I'm here... to learn (as much as I can with all this network and systems engineering crap in my head). That said, I do want to learn and get my hands dirty, but right now I just don't have the time or mental capacity to reach guru status. Capability yes, just can't focus 100% of my efforts on it. Who knows though, I might learn more than I initially intended.

    This is a priority for me though, and if I get to a point where I feel like I'm biting of more than I can chew, I'll reassess my priorities and make adjustments.

    I appreciate all recommendations and feedback regarding my goals/plan and will make adjustments where needed based on that info.

    Deek via Tapatalk on the GNEX.


  10. Top Of Page | #9
    Basic Member

    User Info Menu

    Quote Originally Posted by Fujiwara View Post
    Ragged edge <-- he means getting the most possible WHP/WTQ without a decent safety net.

    Systems engineering will suit your understanding quite well. All we're doing with your car is opening up bottle necks in the system.
    Ah thanks for clarification. I do have an analytical mind and pretty keen trouble-shooting abilities. Sometimes overwhelms me because I over-think and get flustered. I'm looking forward to utilizing you's guy's experience and knowledge.

    Deek via Tapatalk on the GNEX.


  11. Top Of Page | #10
    Basic Member

    User Info Menu

    Nice Edwin!

    Deek, Edwin's old block will suit you fine for a 30R. Hell, I think it laughed at the FP Black he had on it. Me, I prefer overbuilt for what you want to throw at it to remove fears of weak links.

    For example, IF my 20G manages to blow up my current shortblock (I'm only running a safe tune currently, looking to go a tad bit hotter when I get home), I will go rather extreme and get a closed-deck, fully forged, destroked, ACL-bearinged 2.5L. Overkill? Maybe, but I won't have to worry about blowing another motor.

    I'm not near as skilled as Gino or Edwin, but the three of us share the fact that we continue to learn and soak up what we can. Hell, 4yrs ago when I was doing my swap, I knew very little on what I was doing. It took me 4mos of frustration and learning to get it done, but I learned A LOT in doing it and can now take my car apart in my sleep. I had to reset the timing.....it was my first time timing a motor and got it within one tooth of perfection on the first shot. Last year in doing my SB, Steve showed me how to disassemble and reassemble the motor (for the most part....still have to do a SB disassembly). I prefer to do things myself and get it figured out so that I don't have to rely on others, not that I don't like other people touching my car (I don't, but there are a handful of people I DO trust, Gino, Edwin and Steve being among them), but because I like being self-sufficient and saving money.


  12. Likes Deek liked this post
Page 1 of 25 12311 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •