Search results

  1. M

    OVER HEATING like a mother

    OK gents, I am back with some feedback. This is what the owner said. "I used stock head bolts and oem gaskets. they were torqued properly in right sequence. yes I filled at highest point and ive tried old and new water pump but had the same results. however I did not run the heater while...
  2. M

    OVER HEATING like a mother

    Thank you for the replies gentlmen I am going to forward what you suggested and get replies to your questions.
  3. M

    OVER HEATING like a mother

    Hello fellow STI owners, I am in need of some help. A buddy of mine recently blew the motor in his 2006 STI, from what I am thinking was a bad tune. His mods include (prior to the blown motor). - Cobb sf intake - Perrin inlet pipe -ATP 3076r process west TMIC -PNP heads -cosworth pistons...
  4. WP 20140202 001

    WP 20140202 001

  5. WP 20140215 003

    WP 20140215 003

  6. WP 20140215 007

    WP 20140215 007

  7. M

    OPEN DOWN PIPE

    Thanks for the input gentlemen… I drove it all day and the car seems fine. I am defiantly going to keep an eye on things. I plan to data log it as soon as a get a knew dongle for my access port. It really seems to be running better.. Thanks for the knowledge .
  8. M

    OPEN DOWN PIPE

    With a down pipe that long would there be an issue? sorry if i sound like a KID…. but i am learning brother
  9. M

    OPEN DOWN PIPE

    THIS car has a GT35 garrtet turbo with a down pipe that extends to about mid drive shaft, then there is a connection for the rest of the exhaust. I took it off to see how it would sound, and though it is loud, it seems to be breathing better. It has already been tuned for cat free exhaust….. I...
  10. M

    OPEN DOWN PIPE

    Would running an open down pipe change anything? I know there are some very smart subie owners here i would like to hear what you have to say, cause I am still a boot to the Subie?. thanks
  11. M

    HKS SSQV has quit working

    WOW ..LOL.. I though the same thing as I was typing all that. I still can not get the HKS to work so I am going to go with what you pro's say and get the synapse, However is that BOV going to fit in the same flange as the HKS, or do i need a new flange?
  12. M

    HKS SSQV has quit working

    Thanks for the reply. I followed your advice and i sucked on the vacuum line, the diaphragm did not budge. When i blew into it after sucking on the line it made a pop sound. I am assuming it working correctly. I did notice that the lines from the nipple on the BOV to the intake manifold do seem...
  13. M

    HKS SSQV has quit working

    OK my HKS SSQV blow off valve has quit working, and I am getting compressor surge. I have looked at and replaced all of the the vacuum lines. I have also taken the the blow off valve off and inspected the o ring, the compression ring, and the flange to find no defects. I re- installed everything...
  14. M

    What hose is this?

    I removed that sensor this past weekend after reading this thread, however I am curious about what that sensor does. Anyone?
  15. M

    COOLANT OVERFLOW TANK HELP!!!!!!!!!!!!!!!!!

    oh the bracket is literally a piece of aluminum with the proper sized holes drilled into it ... about 3mm thick ..... and about 5 inches long
  16. M

    COOLANT OVERFLOW TANK HELP!!!!!!!!!!!!!!!!!

    I can't get pics up yet but i will as soon as I can..... I have a 2007 WRX STI LIMITED with a Garrett GT 35 rotated kit ..... I didnt build the car but looking at the tank I can see a custom metal bracket " if you will" that has one hole to fit the upper res and another to fit in one of the...
  17. M

    Bolt Part numbers ........

    Hey Guys.... I got the part numbers , I am assuming this may apply to multiple years but to specify ..... these are the bolt part numbers for my 2007 WRX STI LIMITED.... INTAKE MANIFOLD -TO- TGV -- 808208470 THROTTLE BODY -TO- INTAKE MANIFOLD ( flange bolt ) -- 010408400
  18. M

    Bolt Part numbers ........

    THANKS zach, with the lack of replies and my effort into trying to figure it out , this is a tuff nut to crack. I am going to take a trip to the dealership some time this week and pick them up. Will post the part numbers as well.... thanks again
  19. M

    Bolt Part numbers ........

    Hello all.... quick question ... does any body know the part numbers for the following .... ( 2007 WRX STI LIMITED ) The bolts that seat the intake manifold to the TGV's ... And the Bolts that seat the throttle body to the intake manifold .... oh TGV, Intake manifold, and throttle body are stock ???
  20. 259526 229850877026791 4813584 o

    259526 229850877026791 4813584 o

Top