Lights on & lock flashing

[Boogieman98]

I was in the McDonald's drive through when all of a sudden my traction control and hill assist light come on and my diff display goes to full lock and starts flashing. I tried to change the lock with the + - buttons but nothing. Also I tried to hit the traction control button and also nothing. I was logging with my AP at the time. I do not know what it going on. What does this mean?

 

[Spamby]

The system detects a problem and thus disables certain things. Their could be a real problem or it could just be a gremlin.
The AP and the ECU may have not have agreed with one another and caused a momentary fault.
Run a fault code scan and see if anything pops up.
If it persists after turning the car off and restarting then reset the ECU by disconnecting the battery and holding the brake pedal down. Let it sit for a half hour or so and then reconnect.

 

[Boogieman98]

Will do now

 

[Boogieman98]

Been driving all day and the issue never came back. Weird that it happened in the first place. Thanks again for the quick reply.

 

[Spamby]

Good deal. Anytime.